Fan Jet 30 - 11 E INT
Andere producten in deze familie bekijken
Belangrijkste kenmerken
- Fan-shaped gush of water
- Modern stainless steel look
- Stainless steel nozzle
The water curtain produced by these nozzles is up to 9 m high and 27.6 m wide and is therefore also suitable as a screen for projectors and lasers.
Depending on the installation the fan nozzles generate either a vertically ascending water veil, or a diagonally spouting water veil of 6 or 8 mm in thickness. Thanks to its large surface area the attractive water pattern can conceal a foundation base, or exposed pipe and pump equipment from the eyes of observers. The nozzles work independently of the water level and require a throttlez valve to regulate the water pattern.
The absolute highlight, however, is a combination with Multi Directional Drive XL 3D /DMX/02. The large water fan can be rotated and swivelled in any position, thus providing more dynamic water images.
Functiedetails
The Model 30 - 11 E creates water walls of up to 9 m high and 27.6 m wide
Perfect as a projection surface for projector and laser shows and for use with the effect unit Multi Directional Drive XL 3D /DMX/02 and Multi Directional Drive L 3D /DMX/02
Aesthetic, fan-shaped water veils
Depending on the installation direction of the nozzles, different water images are created, e.g. water veils or water gushes
A throttle device is required to adjust the water pattern
Modern, high-quality stainless steel look
Specificaties
Specificaties
- Dimensions (L × W × H)
- 267 × 98 × 220
- mm
- Water film thickness
- 11.0
- mm
- Material
- Stainless steel 1.4571 (AISI 316Ti)
- Net weight
- 4.054
- kg
Downloads
- Product data sheet
- 3D drawing
- 2D drawing
